ADHENSIVE STAINLESS STEEL SOAP DISH HOLDER JP01

Spec/Size

●Can be repeatedly applied and removed

[Where it can be used]
●Flat surfaces larger than the adhesive surface of this product
●Tiles, glass, plastic surfaces and mirror surfaces
●Stainless steel, metal painted surfaces such as refrigerators and washing machines

[Where it cannot be used]
●Surfaces smaller than the adhesive surface of this product
●Cloth surfaces such as wallpaper (vinyl chloride resin, cloth, paper)
●Places with fluorine or mold-proofing treatment
●Earthen walls, plaster, sand walls, mortar, concrete, frosted glass
●Uneven, rough, curved surfaces
●Places with grooves or patterns

[Size (approx.)]
124 x 87 x 80 mm (excluding side hooks)

[Materials]
Seal surface: PET
Adhesive surface: Polyurethane
Rack part: Stainless steel (epoxy resin powder coating)
Hook part: Polycarbonate
Side hook: Nylon

[Load capacity (approx.)]
Overall: 2.5 kg
Per hook: 0.5 kg

[Handling precautions]
●Please attach to a flat surface and use. Do not use on surfaces other than flat surfaces.
●Please make sure that it is firmly attached before use.
●Please use within the load capacity. The load capacity is a guideline. Please note that it varies depending on the usage conditions.
● Be careful not to apply load in any direction other than vertical. It may fall and cause damage.
● Do not use near fire or heating appliances, in high temperature places, or in direct sunlight. It may cause deformation or deterioration.
● The strength of the adhesive surface may vary slightly depending on the mounting surface, material of the location, and environment.
● We are not responsible for any accidents caused by improper handling or installation, or improper installation.
● If installed in the same place for a long period of time, the mounting surface may discolor. Remove it regularly.